Cutting board
From Wikipedia, the free encyclopedia
Jump to:
navigation,
search 
A wooden chopping board with a chef's knife.
A cutting board, also known as a chopping board, is a kitchen utensil (see list of food preparation utensils), used as a flat surface on which to cut or slice things. Cutting boards are often made of wood or plastic. There are also chopping boards made of glass - which are easier to clean than the wooden or plastic ones, but are damaging to the knives.
[edit] Sanitation and care
- Sanitation with cutting boards is delicate, because bacteria can reside in grooves produced by cutting, or in liquids left on the board. For this reason, it is often advised to cut raw meat on separate cutting boards from cooked meat, vegetables or other foods.
- Wood boards should never be placed in the dishwasher, or left immersed for long periods, as the wood or glue may be affected.
- A light food grade Mineral oil is a good preservative for wooden cutting boards as it helps keep water from seeping into the grain. Alternatively, one may also use a food gradedrying oil such as poppyseed oil, tung oil or linseed oil. The first two dry much faster than linseed. Note that most commercially available linseed and tung oil are not “food grade” as they contain metallic driers. In general, edible savory vegetable or olive oils are not recommended because they tend to go rancid, causing the board to smell and your food to pick up the rancid taste.
- Cutting boards should be treated when they start looking dry to prevent cracking. A standard recommendation is 5-7 times a year, or as needed.
- When heavily or deeply scored, wood or plastic cutting boards should be resurfaced as scoring can harbor excessive bacteria, or mildew in the case of plastic boards. Wood can be easily resurfaced with various woodworking tools, such as scrapers or planes. Sandpaper is to be avoided however, as it leaves residual abrasives in the surface, which will dull knives. Resurfacing a plastic cutting board is more difficult and it is recommended to just go out and buy another one.
[edit] Materials
In choosing your cutting surface, there are pros and cons to each depending on your application.
Wood has some advantages over plastic in that it is somewhat self healing; shallow cuts in the wood will close up on their own. Wood also has an advantage over other materials because in general, it has a natural anti-septic property. [citation needed] Hardwoods, which have tightly grained wood with small pores, are best. Good hardness and tight grain helps reduce scoring of the cutting surface and seepage of liquid and dirt into the surface. Red Oak for example, has large pores so it retains dirt, even after washing, making it a poor choice for cutting board material.
Care must be taken when selecting tropical hardwoods for use as cutting boards as many contain toxins or allergens.
I'd also try vinegar and lemon to get the stains out...if the bleach doesnt work, if that fails, follow instructions for resurfacing it.
