Posts by glenster

30

EVIDENCE that Christians fled Jerusalem after 66 CE ...?

by EdenOne in

what the ot says ... what sources of evidence do we have that account for the 'great escape' of the christians from jerusalem after cestius gallus siege of 66 ce ?

do we have any christian prespective about it?

since i concluded that all nt books were concluded before 66 ce (including revelation), what do we have in order to support the story that the jerusalem christians ran to pela ...etc....?

glenster

http://en.wikipedia.org/wiki/Second_Epistle_of_Peter
http://en.wikipedia.org/wiki/Saint_Peter#New_Testament
http://en.wikipedia.org/wiki/First_Jewish%E2%80%93Roman_War
Conservative--early date and acceptance of 2 Peter
http://www.askelm.com/restoring/res022.htm

16

Excuse me.......What Does GOD Need With a Starship ?

by Tech49 in

i have been pondering this thought for a while now, perhaps you all can expound on it a bid.

the bible describes god as "jealous", having great "rage".

"burning anger".

glenster

This board says it was an alien in a variation of the Wizard of Oz.

http://boards.straightdope.com/sdmb/showthread.php?t=175929

95

You know you're getting old when...

by nonjwspouse in

...you can remember as a kid having to stand by the tv set in a certian spot, sometimes holding the antenna to get better reception.. yes, i was an antenna sometimes.

.

any more trips down memory lane for you oldies like me?.

glenster

You realize "I'm the age my Mom and Dad were when they said that," etc.--"so
that's how they felt when they said that." You wish you could go back and see
them again.

With certain social improvements, you're annoyed at what some young people
generalize your parents' whole generation was like knowing your parents weren't
like that.

The young adult celebrities from your childhood are passing away. With some
regularity.

Old people are weird. They don't say, "The Depression" (1930's)--"that was
tough" and wear fedoras and know about the Big Bands and Bing Crosby. They took
the wrong mesc at Woodstock and have favorite Firesign Theater albums or such.
I'm sorry--you're not proper old people. You'll have to be something else.

You remember when only Valley Girls made so many statements sound like
questions and acted mundane things out as easier than finding the right words:
"I went outside? And I was like Brrr!"

You double space between sentences and put quotation marks after the periods
and commas.

1

How to remove, clean, paste, and re-attach the lid of a Haswell CPU

by glenster in

articles on the heat problem.

http://www.bit-tech.net/news/hardware/2013/06/06/haswell-heat/1.

http://www.bit-tech.net/hardware/cooling/2013/06/08/ek-supremacy-precisemount-review/1.

glenster

Delidding Haswell by Cyclops

Wear rubber gloves. (You might also wear an anti-static band and attach the
other end to a ground.)

Held facing the silver surface with the notches at the top, the CPU inside is
vertical in the center with the VRM along the left side of that. Over a soft
surface, carefully cut the corners first then cut the sides--cut the left side
last to avoid the area of the VRM--till you remove the lid.

Use Indigo Xtreme Clean to remove the TIM (thermal interface material) from
over the CPU on both pieces. You don't have to remove the black glue around the
edges.
http://www.amazon.com/EK-TIM-Indigo-Xtreme-Performance-Thermal/dp/B008AMGZCM/ref=sr_1_1?s=electronics&ie=UTF8&qid=1370773319&sr=1-1&keywords=Indigo+Xtreme+Clean

Replace the TIM with Coollaboratory Liquid PRO with the syringe it comes in.
Put a tiny drop on the center of the CPU and spread it with a scalpel avoiding
the VRM. Leave a thin even film over the CPU. Replace the lid.
http://www.amazon.com/Coollaboratory-Liquid-Thermal-Interface-Material/dp/B001PE5XAC

Put the CPU on the motherboard, etc., as usual.
http://www.youtube.com/watch?v=FirsCzTnbdQ
http://www.overclock.net/t/1397672/deliding-a-4770k-haswell-improving-temperatures-and-maximizing-overclockablity

Cyclops used Xigmatek Freezing Point G4718 on the lid of the CPU for the CPU
cooler.

More information about that last step:
http://www.youtube.com/watch?v=I3gx6c62D7I

Attach the back plate for your CPU cooler if it comes with one.

Put a small drop--the size of a lentil, not a pea--of thermal compound (aka
thermal grease/thermal paste/thermal gel/heat paste/heat sink paste/heat sink
compound) on the center of the lid of the CPU. One possible variation: on a
cooler with a mirror-like, perfectly flat surface, "less is more," i.e., apply-
ing less thermal compound than the ideal is not a big problem. However, if the
base of your cooler is not smooth because of the gaps and irregularities typi-
cally found on coolers where the heat pipes touch the CPU directly, you need a
little more thermal paste.
http://www.hardwaresecrets.com/article/What-is-the-Best-Way-to-Apply-Thermal-Grease-Part-2/1392/9
http://www.tomshardware.com/reviews/cooling-air-pressure-heatsink,3058-9.html

Don't spread the paste, which can result in air bubbles--let the pressure of
the CPU cooler spread the paste.

Recommended best to worst:

Arctic MX-2, Gelid Solutions GC-Extreme, Prolimatech PK-1, Thermaltake TG-1,
Tuniq TX-2, XIGMATEK PTI-G4512, Arctic MX-4, Tuniq TX-3, Artic Silver 5, Shin-
Etsu MicroSi G751
http://www.pugetsystems.com/labs/articles/Thermal-Paste-Roundup-172/
http://www.tomshardware.com/forum/360490-28-best-thermal-paste-lowest-temps

Good quiet/cool air coolers

Noctua NH-U14S dual fan
http://www.guru3d.com/articles_pages/noctua_nh_u12s_u14s_review,12.html

Phanteks PH-TC14PE
http://www.silentpcreview.com/Phanteks_PH-TC14PE

Good quiet/cool AIO (all in one) water cooler

Swiftech H220
can add a GPU block
http://www.xbitlabs.com/articles/coolers/display/swiftech-h220.html

16